SG Audio Visual A Series 1.2m wide Intelligent Passport Screen - Grey
The Ai Series of Intelligent Passport screens are perfect for passport and identification photos.The screens are available in High contrast Grey (this one) for a grey background and White for a white background.
The Ai series are our most advanced and durable screens. The Ai series range features a commercial gauge fiberglass screen surface, intelligent control and a tube motor.
Commercial Quality Screen Surface
The fiberglass surface is heavier and as such provides a flatter viewing surface and is more resistant to stretching.
The extra thickness of the screen surface makes the Ai series the appropriate choice where durability and damage resistance is important.
The Ai series screens come standard with a wireless wall switch and a separate wireless remote control. This minimises cabling costs. In addition to the standard controls it is possible to control the system via infra-red, wired wall switch or low voltage control system by purchasing additional control options.
The Ai series uses a tube motor which extend down into the core of the screen to provide more even and reliable retraction when compared with economy screens.
Screen surface area is 120cms (width) by 300cms (drop).
The housing is slim-line white and measures 9cms by 9cms.
Overall width of screen including housing with motor is 135cms.
The Screen weighs 9kgs.
The screen surface is matte Grey high end fabric and has a lightproof back. The screen has a gain factor of 1.2 and no border.
Housing and motor
The screen housing is a heavy duty metal case in off-white and designed to blend into most rooms.
The housing is rectangular and features built-in L-shaped brackets for wall or ceiling mounting.
A long tube motor provides improved screen retraction as the screen surface is pulled up more evenly than traditional motors.
This Ai Series screen connects to a normal power point. The screen includes a wireless wall switch and a RF wireless remote control. Additional options are available for a wired wall switch, low voltage control and infra-red control.
Suitable for wall and ceiling installation.
Easy to Install - Normally only 4 screws required.
The power point should be located on the left hand side of the screen when facing the screen. In many offices the power point may already exist above the ceiling tiles. The built-in L-shaped brackets are used for both direct ceiling and direct wall mounting. Two screws at each end are used to secure the screen to the wall or ceiling.
Optional wall mounts may be purchased to position the screen out from the wall in front of doors, windows, or wall-mounted TV.
WARRANTY AND PARTS
1 year warranty against defects in materials & workmanship. An additional 2 year warranty is available separately.
Spare parts are maintained in our Australian warehouse